The LV3000- R is the business enterprise intelligence VoIP route that Lucida release. It can make use of the network resources well, economical.
The LV3000- R series business enterprise intelligence VoIP gateway’s biggest characteristic is that it combine the FXO and FXS ports, so that when the VoIP failed it can pass VoIP call to PSTN, the port type contain 8 FXO,4 FXS+4FXO,8FXS. The FXO port connects CO line. FXS can be used to connect PBX’s FXO port or the PSTN telephone.

Unique Features

Phone route configuration- the telephone customer can according to call route to choose the road automatically from the direction for IP or PSTN, don't need to change the customer usage habit

Intelligence reroute - under the condition of registering failed, IP network break down, the system auto return to PSTN from VOIP, provide high reliability.

Life line- with the equipments of the FXO port, under the equipments power failure circumstance, the call sign of the port of FXS can turn to the circuit of PSTN automatically.

Number transformation- By analyzing the destination number, when the number match, gateway can carry on the transformation such as increase the ex- number or delete the ex- number

Auto attendant – When PSTN call in, the gateway could provide IVR to let caller redial extension number

Local Switch – By typing the “R” key, calls on a FXS port can be transferred to another FXS port on the same gateway

Product NO.	Differences
LV3000-R8S	8 FXS ports
LV3000-R8O	8 FXO port
LV3000-R4S4O	4 FXS ports,4 FXO port

Product specification

Physical Features
Dimension (HxWxD)	250mm×47.3mm×188mm
Weight	About 1.3kg
Power supply	12V DC
Power	< 15W
Work environment	Temperature: 0℃ ~ 50℃ Humidity: 10% ~ 90%, no coagulation
Storage environment	Temperature: -10℃ ~ 50℃ Humidity: 5% ~ 95%
Interface	1 10M/100M Ethernet (WAN) interface, support auto MDI/MDIX 1 10M/100M Ethernet (LAN) interface, support auto MDI/MDIX 8 lines POTS interface1 emergency bypass interface 1 12V DC power source interface
Display lamp	PWR：display lamp of power supply RUN：display lamp of system status WAN：display lamp of wide area network status LAN：display lamp of local area network status POTS：display lamp of 8
Reliability	Availability of system: > 99.999% MTBF: > 100,000 hours Restoration time of malfunction: < 5min

Features of network
Protocol standard	IEEE802.3 10Base Ethernet IEEE802.3u 100Base Ethernet (Fast Ethernet) IEEE802.3x full-duplex and back – pressure semi-duplex flow control
QoS	Priority queue control based on 802.1p
VLAN/Tagging	Based on 802.1Q VLAN, identify system maintenance SIP/RTP/RTCP operation flow messages separately
IP address	1 IP address, static distribution, DHCP or PPPoE mode
MAC address	1 MAC address (fixed from factory )
Switching mode of network	Store-and-forward
Port full-duplex/semi-duplex	Auto-sensed
Throughput	148810pps
Routing protocol	Static routing

Features of voice functions
Protocol standard	SIP, H.323
Noise control	G.711，G.723，G.726，G.729
Echo cancellation	Comfort Noise Generation & level control
Mute restriction	G.165/G.168-2000 echo restrain
FAX	Mute check and mute compression
Lag time/package-lost disposal	T.30，T.38
POTS interface	Lag time dithering control/ compensation
Convergence ratio	> 5km
Operation supported	1:1
QoS Control	PSTN basic operation, PSTN supplementary operation, console etc.
Quality Enhancement	In good network condition, average PSQM <1.5In bad network condition (package-lost ratio =1%, network delay=20ms, lag time=100ms), average PSQM <1.8In worst network condition (package-lost ratio =5%, network delay=20ms, lag time=400ms ), average PSQM <2.0